Welcome, Unregistered.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Reply
Old 28-Oct-2012, 16:19   #2276
3dcgi
Senior Member
 
Join Date: Feb 2002
Posts: 2,019
Default

Quote:
Originally Posted by eastmen View Post
They are at 4.5 watts on 40nm. I'd think 28nm would be a good drop in TDP.
Voltage hasn't been dropping with each process node like it used to. Going from 4.5 W to 1 W because of a process shrink is unrealistic.
3dcgi is offline   Reply With Quote
Old 28-Oct-2012, 17:46   #2277
Alexko
Senior Member
 
Join Date: Aug 2009
Posts: 2,016
Send a message via MSN to Alexko
Default

Quote:
Originally Posted by 3dcgi View Post
Voltage hasn't been dropping with each process node like it used to. Going from 4.5 W to 1 W because of a process shrink is unrealistic.
1W is probably pushing it, yes.

That said, Temash is more than just a move to 28nm, it's an actual SoC when Hondo is a two-chip solution. This level of integration should bring its own power savings.

AMD also claims more efficient clock-gating for the CPU cores:



Granted, that's a much much smaller contribution to savings, but the point is that it's not all about process.

Apparently, AMD targets 3.6W and up:

__________________
"Well, you mentioned Disneyland, I thought of this porn site, and then bam! A blue Hulk." —The Creature
My (currently dormant) blog: Teχlog

Last edited by Alexko; 28-Oct-2012 at 18:28.
Alexko is offline   Reply With Quote
Old 28-Oct-2012, 21:42   #2278
silent_guy
Senior Member
 
Join Date: Mar 2006
Posts: 1,681
Default

Quote:
Originally Posted by 3dcgi View Post
Voltage hasn't been dropping with each process node like it used to. Going from 4.5 W to 1 W because of a process shrink is unrealistic.
Dropping down to 3W would already be a nice achievement. I can't think of any case where power has gone down by a factor of more than 4 purely because of a process step. Not in the long gone era of almost perfect scaling, so definitely not now.
silent_guy is offline   Reply With Quote
Old 29-Oct-2012, 00:30   #2279
Squilliam
Beyond3d isn't defined yet
 
Join Date: Jan 2008
Location: New Zealand
Posts: 3,037
Default

Why aren't they using 28nm GloFo? That would have made up a lot of ground at least in terms of power efficiency vs Ivy Bridge.
__________________
It all makes sense now: Gay marriage legalized on the same day as marijuana makes perfect biblical sense.
Leviticus 20:13 "A man who lays with another man should be stoned". Our interpretation has been wrong all these years!
Squilliam is offline   Reply With Quote
Old 29-Oct-2012, 00:37   #2280
jimbo75
Member
 
Join Date: Jan 2010
Posts: 831
Default

Pretty sure TSMC's 28nm is in better shape than GF's, regardless of what GF is claiming.
jimbo75 is offline   Reply With Quote
Old 29-Oct-2012, 05:41   #2281
Squilliam
Beyond3d isn't defined yet
 
Join Date: Jan 2008
Location: New Zealand
Posts: 3,037
Default

Why is GloFo lagging so far behind? Effectively every other contract fab has delivered 28nm in volume except for them and Intel is already hard at work on their 2nd generation 22nm processors.
__________________
It all makes sense now: Gay marriage legalized on the same day as marijuana makes perfect biblical sense.
Leviticus 20:13 "A man who lays with another man should be stoned". Our interpretation has been wrong all these years!
Squilliam is offline   Reply With Quote
Old 29-Oct-2012, 10:39   #2282
Alexko
Senior Member
 
Join Date: Aug 2009
Posts: 2,016
Send a message via MSN to Alexko
Default

Aren't they making 28nm chips for Qualcomm?
__________________
"Well, you mentioned Disneyland, I thought of this porn site, and then bam! A blue Hulk." —The Creature
My (currently dormant) blog: Teχlog
Alexko is offline   Reply With Quote
Old 29-Oct-2012, 23:50   #2283
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

Quote:
Originally Posted by Squilliam View Post
Why is GloFo lagging so far behind? Effectively every other contract fab has delivered 28nm in volume except for them and Intel is already hard at work on their 2nd generation 22nm processors.
GF had to make a jump from SOI to bulk while trying to meet the yield and cost requirements for low-margin devices.
Whether or not it's the only problem, the decision by IBM to go with gate-first has in hindsight to have been a bad call for AMD-now-GF and also probably Samsung. All those trying for volume out of it got hit with significant delays.

That GF's leading-edge capacity used to be AMD's fab arm was not ringing endorsment for either high-performance silicon or cost-effective foundry work. Manufacturability seemed to be a consistent theme about using it, and AMD paying hundreds of millions of dollars to not use it is the most recent news blurb I can recall about it.


That aside AMD has announced it is going to create an Opteron-branded Seamicro server chip using an ARM-designed core.
http://www.anandtech.com/show/6418/a...uction-in-2014

Without an architecture license right now, AMD doesn't have the flexibility to design a core that would reflect any of its experience designing high-speed CPUs, but time to market seems to be the primary concern. If AMD went for a soft macro, it may be able to leverage some of its implementation expertise, or it could have cut that corner, too.

Jaguar has not been brought up. Possibly it's because there is no current effort to build one without the GPU that's far enough along. There may be some features missing compared to the AMD server chips that the tablet design lacks.
It shouldn't be an interface problem since Seamicro just needs a PCIe connection to work. In terms of having a coherent system, Seamicro doesn't offer a solution.


One thing I'm curious about is whether the Seamicro ASIC currently--or the next-gen chip it probably had in the pipeline--already had some ARM microcontroller logic or an ARM core already planned to go into it. A lot of specialized controllers already have one or more ARM cores in them, although there may have not been a provision for a V8 core. The existing infrastructure might make it easier to stick one or more on the same die, though.
I've not seen much info on the ASIC to say what's in it, although it included an FPGA in its presentations. The presence of the FPGA isn't really an argument for or against ARM, as FPGAs can house ARM cores as well.
The irony in this scenario would be AMD marketing putting the cart before the horse by now mentioning the ARM core and the incidental fabric logic.
That's more for an unsubstantiated joke, since a Seamicro chip probably wouldn't have gone for V8 core if it was content to sit in the background.
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 30-Oct-2012, 02:16   #2284
itsmydamnation
Member
 
Join Date: Apr 2007
Location: Australia
Posts: 644
Default

it seems generally accepted that most ARM SOC's have poor memory performance, i wonder how much SOC performance could be gained just from AMD 's IMC, maybe a jaguar/kentsfield type cache design.


seems very niche market but could have quite good perf/watt with seamicro's interconnect and AMD IMC as points of differentiation to the other ARM server systems .
itsmydamnation is offline   Reply With Quote
Old 30-Oct-2012, 14:39   #2285
caveman-jim
Member
 
Join Date: Sep 2005
Location: Rage3D
Posts: 301
Default

Unless AMD tweak the ARM64 v8 design for lower power, better clocks, it's not going to be very compelling. If AMD wanted mixed big/little they could have mixed BD family and BC family, but they picked ARM instead...
__________________
http://twitter.com/cavemanjim
caveman-jim is offline   Reply With Quote
Old 30-Oct-2012, 14:54   #2286
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

I'm not going to knock the ARM core in terms of power. AMD doesn't set a very high bar, currently.
ARM made a point to keep the big and little cores the same with regards to their ISA support.
AMD high-power and low-power chip lines did not match in the beginning, and Jaguar does not change this.
A thread migrating from a BD-derived core to a Jaguar core stands a good chance of blowing up.

AMD's announcement doesn't give much detail on what it's doing to support what appears to be a me-too initiative. There isn't an Intel that AMD can ride the coattails of in terms of software ecosystem.
It also appears that there is a firm split between the x86 and ARM sides, since there is a separate x86APU only section for anything using media. This ARM initiative appears to be disconnected from anything else Opteron. It remains to be seen what it might share with its more established brethren.
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 31-Oct-2012, 02:16   #2287
3dcgi
Senior Member
 
Join Date: Feb 2002
Posts: 2,019
Default

Quote:
Originally Posted by 3dilettante View Post
IThere isn't an Intel that AMD can ride the coattails of in terms of software ecosystem.
What do you mean by this? Aren't multiple ARM vendors already talking about servers meaning AMD isn't alone in driving software support?
3dcgi is offline   Reply With Quote
Old 31-Oct-2012, 04:32   #2288
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

The ecosystem doesn't yet exist. In contrast to x86, Intel built the much of the playing field AMD tried to compete on with compilers, software development and evangelism, and in the case of servers it built the x86 server market before AMD dipped its toes in.
AMD64 was one instance where things were reversed, and a change that helped expand the x86 server market as a whole.

The ARM server market hasn't totally justified its existence yet, and in this case AMD doesn't look to have an x86-64 sort of opportunity to influence the direction of the platform, or even the opportunity to try anything with the ISA.
There's a decent chance that AMD's ARM server chip will hit a market past its flash-in-the-pan stage, like Bobcat and netbooks.

Another unknown is the nature of this ARM market, should it succeed. The industry is starting out consolidated and becoming more vertically integrated, whereas the era of the IBM PC-compatible was marked by a breaking down of those barriers.
Of course, if AMD finds a big sugar daddy to cater to, it might work out fine. Otherwise there could be a market where whole sections are immune to evangelism from AMD because they already have a pet supplier or in-house design team.
The whole idea of AMD making an x86 and that almost every non-big iron server room could be a buyer--even with the reality of an anti-competitive Intel, doesn't look like it will ever happen for ARM. Additionally, the Seamicro interconnect basically rules out everything but the super-dense shared-nothing market, which is a niche that hasn't justified its existence quite yet in a niche that hasn't justified its existence.
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 31-Oct-2012, 05:54   #2289
nAo
Nutella Nutellae
 
Join Date: Feb 2002
Location: San Francisco
Posts: 4,297
Default

Frankly I still haven't understood where the value of ARM servers is. Perhaps they are going to be cheaper (but that's a matter of pricing) but when I read that they are going to be more power efficient because of their ISA I can only roll my eyes..
__________________
[twitter]
More samples, we need more samples! [Dean Calver]
The opinions expressed herein are my own personal opinions and do not represent my employer's view in any way
nAo is offline   Reply With Quote
Old 31-Oct-2012, 06:01   #2290
ERP
Moderator
 
Join Date: Feb 2002
Location: Redmond, WA
Posts: 3,149
Default

Quote:
Originally Posted by nAo View Post
Frankly I still haven't understood where the value of ARM servers is. Perhaps they are going to be cheaper (but that's a matter of pricing) but when I read that they are going to be more power efficient because of their ISA I can only roll my eyes..
A lot of servers massively underutilize the CPU, so using less powerful, more power efficient ones make a lot of sense. When you build datacenters, things like how much copper you have to run to the building to get power to the servers actually matter.

I don't think it's anything to do with the ISA specifically, likely more the design has been predominantly aimed at power sensitive applications for so long it's probably an easier starting point.

I worked at Bing for a year at one point, you'd be surprised how low CPU utilization was even on the compute clusters, you were almost always constrained by how efficiently you could move the data, rather than any processing you might be doing.
ERP is offline   Reply With Quote
Old 31-Oct-2012, 09:01   #2291
itsmydamnation
Member
 
Join Date: Apr 2007
Location: Australia
Posts: 644
Default

Quote:
Originally Posted by 3dilettante View Post
Additionally, the Seamicro interconnect basically rules out everything but the super-dense shared-nothing market, which is a niche that hasn't justified its existence quite yet in a niche that hasn't justified its existence.
you mean 99.9% of the internet isn't a justifiable niche? Now weather the market thinks this is a valuable product is something we will have to wait and see.
itsmydamnation is offline   Reply With Quote
Old 31-Oct-2012, 15:06   #2292
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

AMD is trying to cash in on a movement towards physicalization as opposed to virtualization. This ARM chip in particular is likely to push it even more to an extreme with shared-nothing physical machines that will have serious limitations with demand spikes at any given instance.

The question for the niche AMD is trying to cater to is whether the incumbent methods or some other technological advance won't come along and be sufficient for enough of this market that it doesn't justify its own hardware effort. If virtualized or shared systems can improve power consumption and still provide their inherent advantages in providing more peak for those spikes, then very few takers may materialize.
This is on top of the fact that AMD's interconnect is by design much less flexibile in what it can be applied to, and whether there will be enough customers that won't be satisfied with other low-margin players or in-house designs.

Other concerns like the lack of trust in AMD's execution, its being spread across yet another platform, or survivability compound the problem.
A lot more needs to be done to prove that this is more than a desperate ploy by AMD to create buzz in part by compromising whatever credence the Opteron brand has in servers by sharing it between a mature, inferior, but stable half and a powerpoint slide.
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 31-Oct-2012, 23:30   #2293
cal_guy
Member
 
Join Date: Jun 2008
Posts: 155
Default

It's also quite likely that SeaMicro's development on ARM was well under way before they were acquired by AMD.
cal_guy is offline   Reply With Quote
Old 31-Oct-2012, 23:35   #2294
Alexko
Senior Member
 
Join Date: Aug 2009
Posts: 2,016
Send a message via MSN to Alexko
Default

Quote:
Originally Posted by cal_guy View Post
It's also quite likely that SeaMicro's development on ARM was well under way before they were acquired by AMD.
Yeah, apparently that was on their roadmap. I don't know if they were planning to make actual chips themselves, but they were planning something.
__________________
"Well, you mentioned Disneyland, I thought of this porn site, and then bam! A blue Hulk." —The Creature
My (currently dormant) blog: Teχlog
Alexko is offline   Reply With Quote
Old 31-Oct-2012, 23:43   #2295
itsmydamnation
Member
 
Join Date: Apr 2007
Location: Australia
Posts: 644
Default

Quote:
Originally Posted by 3dilettante View Post
AMD is trying to cash in on a movement towards physicalization as opposed to virtualization. This ARM chip in particular is likely to push it even more to an extreme with shared-nothing physical machines that will have serious limitations with demand spikes at any given instance.
this is a problem that is already long solved and having 10,000 hosts in your server pools vs 1,000 isn't a problem.
itsmydamnation is offline   Reply With Quote
Old 01-Nov-2012, 02:57   #2296
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

Is it solved by less than six years, or roughly how far back in x86 terms you have to go to match the likely performance of the ARM chip that won't be out until 2014?
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 01-Nov-2012, 05:47   #2297
itsmydamnation
Member
 
Join Date: Apr 2007
Location: Australia
Posts: 644
Default

Quote:
Originally Posted by 3dilettante View Post
Is it solved by less than six years, or roughly how far back in x86 terms you have to go to match the likely performance of the ARM chip that won't be out until 2014?
i dont actually get what your saying, but its going ot come down to density/power/perf/io/TCO. the average internet facing X86 machine hasn't been that great across those metrics. I wouldn't be so quick to judge "performance" in either direction without systems in hand.
itsmydamnation is offline   Reply With Quote
Old 01-Nov-2012, 11:11   #2298
CarstenS
Senior Member
 
Join Date: May 2002
Location: Germany
Posts: 2,842
Send a message via ICQ to CarstenS
Default

Quote:
Originally Posted by ERP View Post
A lot of servers massively underutilize the CPU, so using less powerful, more power efficient ones make a lot of sense. When you build datacenters, things like how much copper you have to run to the building to get power to the servers actually matter.

I worked at Bing for a year at one point, you'd be surprised how low CPU utilization was even on the compute clusters, you were almost always constrained by how efficiently you could move the data, rather than any processing you might be doing.
But isn't that a matter of estimating and managing workloads and better virtualization techniques? I mean, when you're having an order of magnitude more physical installations on the server side, how much more complex would the data highways need to be in order to even reach the levels of the classic environments - not to speak of any improvements.
__________________
English is not my native tongue. Before flaming please consider the possiblity that I did not mean to say what you might have read from my posts.
Work| Recreation
Warning! This posting may contain unhealthy doses of gross humor, sarcastic remarks and exaggeration!

Last edited by CarstenS; 01-Nov-2012 at 11:16.
CarstenS is offline   Reply With Quote
Old 01-Nov-2012, 15:25   #2299
3dilettante
Senior Member
 
Join Date: Sep 2003
Location: Well within 3d
Posts: 4,070
Default

Quote:
Originally Posted by itsmydamnation View Post
i dont actually get what your saying, but its going ot come down to density/power/perf/io/TCO. the average internet facing X86 machine hasn't been that great across those metrics. I wouldn't be so quick to judge "performance" in either direction without systems in hand.
Providing a data service is frequently latency sensitive. Web-facing servers are frequently idle, but that sliver of time they are active they are expected to not exceed some ceiling in latency, particularly for user-facing services. A platform that consumes 1 Watt is not interesting for a big chunk of the workloads if it takes 5 hours to serve a simple request.
The subset of the market that has relaxed time constraints is a subset of a subset, however, AMD may be promising this product in some potentially latency-constrained environments as well.

What solutions are there for a lack of peak capability? Existing servers have performance in spades, can partition out resources as jobs ramp up and down, and are making continual strides in power management to bring them closer to Seamicro's isolated pools of weak processors that perform like Intel CPUs from 2005-2006. Some of the ARM competition AMD will have might have a similar performance deficit, but at least some are not going the shared-nothing route. Rather, they plan to have capable interconnects that have the luxury of going shared-nothing while not writing off the rest of the market.
__________________
Dreaming of a .065 micron etch-a-sketch.
3dilettante is offline   Reply With Quote
Old 01-Nov-2012, 20:45   #2300
itsmydamnation
Member
 
Join Date: Apr 2007
Location: Australia
Posts: 644
Default

Quote:
Originally Posted by 3dilettante View Post
Providing a data service is frequently latency sensitive. Web-facing servers are frequently idle, but that sliver of time they are active they are expected to not exceed some ceiling in latency, particularly for user-facing services.
i dont see how this is a problem for a BBOSN full of ARM cores. First your network latency is going to be the very vast majority of a web server latency. Second why is the ARM core going to be high latency, assuming a suitable memory sub system? Your going to have far more execution resources per clock on a 16 core arm vs a comparably priced X86 server.

Quote:
A platform that consumes 1 Watt is not interesting for a big chunk of the workloads if it takes 5 hours to serve a simple request.
thats a straw man and nothing more.

Quote:
The subset of the market that has relaxed time constraints is a subset of a subset, however, AMD may be promising this product in some potentially latency-constrained environments as well.
why do you keep making up this latency will be high? Have you ever played with anything like a raspberry pie? i've run quite complex web apps on one like cacti, its a memory bound 700mhz arm 11 platform but even that will a full blown LAMP install runs pretty well. Let alone a 16 core A-57 @ 2-3ghz with 16/32/64 gigs of ram. You have done nothing to justify the notion that application latency is going to suffer with arm.


Quote:
What solutions are there for a lack of peak capability? Existing servers have performance in spades, can partition out resources as jobs ramp up and down, and are making continual strides in power management to bring them closer to Seamicro's isolated pools of weak processors that perform like Intel CPUs from 2005-2006.
web servers and there application servers are isolated workloads, peak load is handled the exact same way it is handled right now, by a few of these guys running combination of global and local traffic services.

You also have to consider the way web compute providers provide elasticity and scaling of provisioning, its pretty much per core/thread based which makes the arm based solution more granular and depending on density far more scalable (ignoring any ATOM/Jaguar based solutions for the moment).


Quote:
Some of the ARM competition AMD will have might have a similar performance deficit, but at least some are not going the shared-nothing route. Rather, they plan to have capable interconnects that have the luxury of going shared-nothing while not writing off the rest of the market.
i dont think your understanding the workloads or the business drivers of this market. big scalable coherent compute is far more niche then what a BBOSN is targeting. i have never seen a workload that can scale across 16 threads but not across boxes. It why 1 and 2 socket boxes massively out strip 4+ in sales.

im not saying that this play by AMD is going to work, but your argument isn't very convincing and a broken clock is right two times a day.
itsmydamnation is offline   Reply With Quote

Reply

Tags
amd, charlie, doom and gloom, financials, fud

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:35.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.